The Genesis Taper Insert
The Genesis taper insert burner offers the ultimate experience in realism combined with un-compromising hand built quality. The Genesis is offered as both a 16” and 18” and, thanks to its unique construction, is ultra quiet in operation.
The use of the specially designed ‘finger matrix’ creates an intense glowing core to increase radiant heat output whilst ensuring that there is an abundance of realistic flame.
The Genesis taper insert is available in both 16” and 18” sizes and comes with a coal fuel bed. To further increase the flexibility of this appliance, it can be fitted with any of the following high quality and dependable valves; the BM 733 manual valve, the Mertik GV34 permanent pilot remote control valve or the GV 60 full sequence valve.
The Genesis is available as a Custom burner
Features:
Notes:
- Emergency off switch on full sequence remote control model
- Oxy depletion pilot to ensure safe operation
- Infra red full sequence remote control
- Available in natural gas and LPG
- No vent for 16” NG appliances subject to clearance of products
- 16” taper can be up rated to 8.0 kW for NG or 9.1 kW for LPG if required
Dimensions:
| Width Front |
Width Rear |
Depth |
Height of legs |
kW Input (Gross) |
Flue Size (Subject to spillage test and opening size) |
|
|---|---|---|---|---|---|---|
| 16" Taper (Size 'B') |
374 mm | 223 mm | 198 mm | 95 mm | 6.95 | Class I (7") Class II (5") |
| 18" Taper (Size 'C') |
420 mm | 255 mm | 205 mm | 95 mm | 8.5 | Class I (7”) |
- 16" Genesis
- 18" Genesis
- Coal
Multiglow Fires, Canterbury Road, St Nicholas at Wade, Birchington, Kent.
CT7 0PQ
Copyright, © 2009-2010 Multiglow Fires
